Transmission & Actuator

Magnetic Particle Brake, Single Shaft, 3Nm-400Nm

$319.89

SKU: ATO-PB

Magnetic particle brake, single shaft, rated torque can select 6Nm, 12Nm, 25Nm, 50Nm, 100Nm, 200Nm or 400Nm, maximum rated speed of 1800rpm, with maintain, braking, buffer start, tension control and torque limit. Electric brake has the advantages of quick response, simple structure, no shock vibration and energy saving. Manufacturer direct sales.

Magnetic Particle Clutch, Double Shaft, 3Nm-400Nm

$369.38

SKU: ATO-PC

Magnetic powder clutch, rated torque can choose 3Nm, 6Nm, 25Nm, 50Nm, to 400Nm, 1800rpm, voltage DC 24V, double shaft. Electric clutches have been widely used in paper making, printing and rubber industry. Overload protection, speed adjustment and manufacturer direct sale.

Magnetic Particle Clutch, Hollow Shaft, 6Nm-200Nm

$415.56

SKU: ATO-PCO

Hollow shaft magnetic particle clutch with maintain, braking, buffer start, tension control and torque limit, the rated torque can be chosen as 6Nm,12Nm, 15Nm, 50Nm, 100Nm and 200Nm. Maximum speed of 1500rpm, 24VDC, long service life and manufacturers direct sales.

Magnetic Powder Brake, Hollow Shaft, 6Nm-200Nm

$403.89

SKU: ATO-POB

High performance magnetic powder brake can select rated torque 6Nm, 15Nm, 25Nm, 50Nm, 100Nm, and 200Nm, hollow shaft, stainless steel material, 24VDC voltage, 12 months warranty. It has the functions of maintenance, brake buffer starting, tension control and torque limitation.

Magnetic Powder Clutch, Hollow Shaft, 6Nm-200Nm

$415.56

SKU: ATO-POC

High quality magnatic particle clutch rated speed with 1800rpm, rated torque 6Nm, 15Nm, 25Nm, 50Nm, 100Nm, 200Nm are optional, DC voltage 24V. Hollow shaft, quick response, used for tension control, torque limit and overload protection.

Mini Linear Actuator, 12V/24V, 800N, 150mm Stroke

$132.89

SKU: ATO-LACTU-800

Miniature linear actuator is a powerful and reliable electric linear actuator for small to medium loads, max load up to 800N, 12V/24V, built-in limit switches, IP66 rated, rated speed at full load is 5mm/s, 50mm/100mm/150mm to 450mm stroke for selection.

Multistage Venturi Vacuum Generator

$87.72

SKU: ATO-MVG-Z1

Multistage venturi vacuum generator for sale, nozzle diameter 1.2/2.4mm, Rc 3/4" vacuum port, Rc 1/8" pressure supply port, max. vacuum pressure -84 kPa, max. operating pressure 0.7 MPa, structure of energy saving 3 stage diffuser.

Pneumatic Foot Pedal with Lock, 5 Way 2 Position

$20.37

SKU: ATO-PFD-4F2108L

Locking 5 way 2 position pneumatic foot pedal, step down and lock it, then step on it again to open it, air outlet and air inlet holes 1/4 inch, allowing unidirectional control, suitable for controlling spring or load return cylinders.

Pneumatic Foot Pedal, 3 Way 2 Position, with Pneumatic Fitting

$27.97

SKU: ATO-PFD-FV3206

2 Position 3 way pneumatic foot pedal is a kind of foot-controlled reversing valve, which adopts copper core to reduce noise and reduce noise. It is small in size, beautiful in appearance, easy to operate and has a long service life.

Pneumatic Foot Pedal, 4 Way 2 Position

$25.96

SKU: ATO-PFD-FV420

Pneumatic foot pedal switch for air control and air direction change, 4 way 2 position, one in and two out, with one muffler, reinforcement spring made of thicker stainless steel, high strength.

Pneumatic Foot Pedal, 4 Way 2 Position, with Pneumatic Fitting

$27.39

SKU: ATO-PFD-FV4206

Pneumatic foot pedal equipped with a muffler, 4 way 2 position, pneumatic fitting 6mm, 8mm and 10mm can be selected, the internal thread is clear and standard, the sealing performance is good, no leakage, stable and reliable.

Pneumatic Foot Pedal, 5 Way 2 Position

$21.39

SKU: ATO-PFD-4F2108

5 Way 2 position pneumatic foot pedal for sale, direct acting operation, air hole one in and two out, small size, thickened spring design, durable, not easy to rust, ideal for controlling spring or load return cylinders.

Pneumatic Hand Lever Valve, 3 Way, 2 Position

$45.39

SKU: ATO-VALVE-32

Pneumatic hand lever valve, three way, two position, with 1/4, 3/8, 1/2 inch port, provide a manual return operation to allow the air to pass. This air valve can be used to control air chucks, pneumatic actuators and venturi vacuum generators.

Pneumatic Vacuum Ejector, Body Ported Type

$32.58

SKU: ATO-C-ZHD

Single stage pneumatic venturi vacuum ejector/generator at economical price, body ported type, nozzle diameter 0.5, 0.7, 1.0, 1.3mm available, max. vacuum pressure -88/-48 kPa, supply pressure 0.45 MPa.

Pneumatic Vacuum Generator

$32.86

SKU: ATO-CV-RL

Single stage pneumatic vacuum generator/ejector with low price, selectable 0.5, 1.0, 1.5, 2.0, 2.5, 3.0mm nozzle, max. vacuum pressure -91.8/57.2 kPa, supply pressure 0.5 MPa, equipped with silencer and signal confirmation equipment.

Quick Connect Air Compressor Fitting, 6mm

$15.86

SKU: ATO-AHF-PU06

Air compressor hose fitting is mainly used for air piping and quick connectors of pneumatic tools, outer diameter 6mm, 10mm, 12mm and 16mm are optional, withstand strong pressure, no trip, strong oxidation resistance, not easy to be corroded.

Rigid Coupling, 16 x 16mm

$99.85

SKU: ATO-SC-GNC-1616

Rigid shaft coupling diameter 16mm, length 16mm, 4mm to 8mm, ratd torque 5 N.m, low inertia and high sensitivity, shaft coupler is made of high-strength aluminum alloy with strong corrosion resistance.

Rigid Coupling, 16 x 24mm

$99.85

SKU: ATO-SC-GNC-1624

Rigid coupling diameter 16mm, 24mm length, rated torque 5 N.m, speed of 9400rpm, moment of inertia 2.9 X 10-7 N.m, rigid clamping couplings are widely used in automation equipment, lasers (marking, engraving, welding, cutting), non-standard automation, dispensing machines, screw machines, etc.

Rigid Coupling, 20 x 20mm

$99.85

SKU: ATO-SC-GNC-2020

Diameter 20mm x length 20mm rigid coupling for sale, 5mm to 10mm, rated torque 10 N.m, speed of 7500rpm, high torque and high rigidity, the shaft couplers are widely applied to small CNC machines encoding and screw machines.

Rigid Coupling, 25 x 25mm

$109.86

SKU: ATO-SC-GNC-2525

Sell low price rigid coupling, clamp type, 25mm x 25mm, bore 6mm to 12mm, rigid couplings have the advantages of light weight, ultra-low inertia and high sensitivity, widely used in automation equipment, laser marking and dispensing machines.