Blog

Hydraulic punching machine is a kind of equipment specially used for punching and drilling metal materials, widely used in pipeline processing of air conditioners, water heaters, airplanes, automobiles, etc. It is specially used for punching holes in metal plates such as angle iron, flat iron, copper plate, etc. It is especially suitable for field operations in electric power, construction and other industries.

Water is one of the most important substances on Earth, covering 71% of the Earth's surface, while the human body can contain up to 75% of water. Water is essential for a wide range of applications, including agriculture, science, medicine, transportation, heating, recreation, and food processing, as well as cleaning, and perhaps most importantly: drinking. Many common water problems can be solved by water purification systems. Laboratory ultrapure water equipment currently sold by ATO provides the highest quality pure and ultrapure water with multi-stage pre-filters, reverse osmosis(RO), ultrafiltration(UF), ion exchange, UV, final filters, and other technologies. In this blog, the ATO will take you through what a water purification system is and how it works.

The laboratory water purification system is an indispensable piece of equipment in the laboratory. These systems remove impurities and contaminants from tap water through physical and chemical processes to produce pure, sterile, high-quality water. In today's laboratories, the water environment as the most basic environment of the vast majority of laboratories occupies a very important position in the experiment, water quality often determines the authenticity and reproducibility of many experimental results, because any trace substances that may contaminate or interfere with the experimental results may lead to erroneous experimental results. In this blog, ATO will share with you some information and experiences about laboratory water purification systems. 

A worm gearbox, also known as a worm gear reducer, is a power transmission mechanism that uses the speed converter of the gear to reduce the number of revolutions of the motor to the desired number of revolutions and obtain a larger torque mechanism. Worm gearboxes have various applications, from automotive and heavy machinery to industrial automation and robotics. In this blog, ATO will discuss what is a worm gearbox, its characteristics, common problems, and solutions.

An electric fan heater is a device that emits warm air by consuming electrical energy. Industrial electric fan heaters are an excellent way to heat large spaces quickly and efficiently. They are robust, durable, and can withstand harsh environments, making them ideal for use in warehouses, factories, and other industrial settings. ATO industrial automation currently has 2/3/5/9/15KW industrial electric fan heaters on sale. In this blog, ATO will discuss what an industrial electric fan heater is, along with the main precautions for installation and maintenance techniques.

Hydraulic jack is a kind of the simplest lifting equipment that lifting height is little (less than 1m). The hydraulic jack has compact structure, stable operation and self-locking effect, so it is widely used. Jacks are mainly used in factories, mines, transportation and other fields as vehicle repairs and other lifting, support and other work. Its structure is light and strong, flexible and reliable, and can be carried and operated by one person. As a tool with a wide range of uses, the hydraulic jack can only play its role better if you understand its principle. Next, let's learn how the hydraulic jack works and how to use it.

When there is a fire, the smoke will cause hypoxia of the human body. When the smoke reaches a certain concentration, the human body will have difficulty breathing due to lack of oxygen. When the smoke enters the lungs, it can cause death by suffocation due to its weakened ability to combine oxygen and carbon dioxide. When smoke enters the body through the respiratory system, it raises the awareness of respiratory diseases. To protect people's health and safety, smoke detectors were created. Smoke detector is to monitor the concentration of smoke to achieve fire prevention, it is a kind of advanced technology, stable and reliable detector and is widely used in a variety of fire alarm systems. So let's learn what smoke alarms can do.

The rebar tying machine is also known as automatic lithium battery rebar tying machine because it works with lithium batteries. It is a hand-held battery-type rebar fast binding tool, which replaces the manual operation of the original steel wire hook. It is shaped like a large pistol, with a wire winding mechanism at the muzzle, a rechargeable battery installed at the handle, a coil at the end of the gun to supply muzzle spinning, and a transmission rotating device and accessories installed in the chamber, and the trigger is the power switch. Here, ATO will tell you how it works.

The rebar bender is an indispensable and important piece of equipment in construction engineering and steel structure engineering. It can quickly and accurately bend rebars into the required shape and is an essential tool for building steel structures. Today, ATO industrial automation will tell you about the structure and working principle of different types of rebar benders.

The rebar cutter, also known as steel bar cutter, is a tool used to cut steel bars and is indispensable mechanical equipment in the construction industry. These machines are designed to accurately and efficiently cut steel bars into desired lengths. In the past, manual cutting was the only option, but with the advent of rebar cutters, the process has become much easier and quicker. Now, ATO will briefly analyze the structure and working principle of the above rebar cutters for you. 

Rebar tying machine, also known as Automatic rebar tying machine or rebar tier, is a handheld battery rebar fast-tying tool. It is an intelligent tool with a built-in microcontroller that can automatically complete all steps of rebar bundling, which can be widely used in the field of construction engineering to replace manual bundling of rebar. The rebar tying machine is mainly composed of four parts: body, special wire reel, battery box, and charger. In this article, ATO will provide an operation guide on how to operate a rebar tying machine.

A frequency converter, also known as an AC power supply/inverter, is a power conversion device. At present, ATO single-phase and three-phase frequency converters are ideal solutions for household appliances, industrial power conversion, laboratory testing, aviation, military applications, etc. ATO.com will introduce you to how to test the fuse/MOS module/CBB65 capacitor in the frequency converter in this article. In order to understand the testing process more clearly, we have released a video explanation, please watch the video for more information.

Frequency Converter, also known as AC power supply/frequency changer, is an electric supply conversion device. It converts the alternating current in the electric supply through AC-DC-AC and outputs a pure sine wave. It converts the alternating current in the mains through AC-DC-AC and outputs a pure sine wave. In this article, ATO will introduce you to how to test a 9V transformer/IGBT/driver board in a frequency converter. In order to understand the testing process more clearly, we have posted a video explanation, please watch the video for more information.

Since GPRS DTU is mostly used in remote monitoring sites, the stability of GPRS DTU becomes very important. Many users choose GPRS DTU, and it is not enough to finish the selection work only by doing some simple tests in the early stage. If you choose an unstable GPRS DTU and apply it in large quantities, it is tantamount to planting a time bomb for your own monitoring system. So how can you test the stability of GPRS DTU comprehensively and quickly at the beginning? This has become an important topic.

Science and technology are progressing, and the times are progressing. From people's daily life to industrial production, science and technology are indispensable both inside and outside. Nowadays, rebars are indispensable materials in bridges, other buildings and large-scale projects. Correspondingly, when workers operate, they will inevitably use some rebar processing machinery and equipment to straighten and cut off, which is our commonly used rebar cutter. Today, ATO industrial automation will take you to know the correct use method and maintenance tips of rebar cutter.

Data Transfer unit is a wireless terminal device specially used to convert serial port data into IP data (or convert IP data into serial port data), and then transmit it through the wireless communication network. DTU has been widely used in electric power, environmental protection, LED information release, logistics, hydrology, meteorology and other industries. Although the applied industries are different, the applied principles are the same. Most of the DTUs are connected to industrial equipment, such as PLC, single-chip microcomputer and other automation products, and then establish a wireless communication connection with the background. With the increasing development of the Internet today, the use of DTU is becoming more and more extensive. It provides assistance for information and industrial integration of various industries and between industries.

As one of the rebar processing machines, the rebar bender has a working structure of a horizontal working disc that rotates on a vertical axis. The rebar is placed at corresponding positions, the supporting pin shaft is fixed on the machine tool, and the central pin shaft and the bending pin shaft are installed on the working disk. When the disk rotates, the rebar is bent. In order to bend rebars of various diameters, there are several holes on the working plate for inserting and pressing the bending pins, and the center pins of different diameters can also be replaced accordingly. In this article, ATO industrial automation is going to tell the operation steps of our product electric rebar bender, which has an optional no-load power of 950W or 1300W.

Digital force gauges are widely used in various industries such as pharmaceuticals, cosmetics, food, packaging, automobiles, electrics, electronics, and machinery. It is an indispensable force measuring tool in product manufacturing, quality management, research and development. The digital dynamometer is based on the traditional mechanical dynamometer structure that uses knives, knife bearings, and levers as the measurement structure and is displayed by mechanical transmission. It is reformed to use sensors to convert electrical signals into electrical signals for measurement and display, so as to achieve the purpose of force measuring instruments. In structure, there are only a small number of mechanical parts in the detection part and others are composed of electronic devices. Therefore, the digital force gauge is an integrated instrument and equipment with the force-electric sensor as the core and the electrical signal measurement and display as the main body.

The hydraulic punching machine is a machine composed of two parts, a hand pump or an electric pump and a working head. Hydraulic hole punch is a kind of punching machine, which can be divided into two categories: split hydraulic punching machine and integrated electro-hydraulic punching machine. The hydraulic metal hole punch can be used to punch holes in metal plates such as angle iron, flat iron, copper, aluminum row, etc. It is especially suitable for electric power, construction and other industries working in the field. The hydraulic punching machine is operated by a hand pump or an electric pump. The first part is composed of two parts. The oil delivery hose is connected by a quick connector, which is reliable in sealing, fast and safe. There is no directional restriction during operation, and it is easy to assemble and disassemble.

Infrared thermal imaging cameras convert invisible infrared radiation into visible thermal images and reflect the temperature distribution of the target surface. Different objects and even different parts of the same object differ in their ability to radiate and how strongly they reflect infrared rays. By exploiting the difference between the radiation of an object and the background environment, as well as the difference between the radiation of various parts of the scene itself, an infrared thermal image can show the rise and fall of various parts of the scene, and thus reveal the characteristics of the scene. The transformer is an important equipment of the power supply system, and the failure is initially accompanied by partial or overall temperature abnormalities. ATO thermal imaging cameras can detect and diagnose equipment failures simply, safely, in real time and intuitively, ensuring equipment safety and long-term operation.