Tag: submersible sewage pump

Submersible sewage pump has been more and more attention, the scope of use is more and more wide, from the original simply used to transport water to transport a variety of domestic sewage, industrial wastewater, construction site drainage and so on. Sewage pump with compact structure, easy installation and long running time. When we use sewage pump, we should also know how to solve the failure. In this article, we will introduce the troubleshooting of sewage pump.

With continual use, almost every industrial sewage pump will fail or at least run into issues at some point. The key is to educate yourself on the warning signs of a heavy duty sewage pump failure. That way, you will all be aware when something is wrong, and you will be able to seek pump repair or replacement early on before there is a chance for any more severe damage to take place. There are 4 signals that you need to replace a new industrial sewage pump.

Submersible sewage pump is a kind of environmental protection industry used to transport solid particles, fiber and other solid-liquid mixed liquid, such as domestic sewage, industrial waste water, mud and other pump products. Sewage pump and motor coaxial rotation, and at the same time submersible work under the liquid. Its installation mode is divided into automatic coupling installation and mobile installation. In this article we will cover both installation methods in detail.

Compared with the general horizontal pump or vertical sewage pump, sewage pump compact structure, small footprint. Small sewage pumps can be installed freely, large sewage pumps are generally equipped with automatic coupling devices can be installed automatically, installation and maintenance is quite convenient. Submersible sewage pump because of the pump and motor coaxial, shaft short, rotating parts light weight, so bearing load is relatively small, life is much longer than the general pump. There is no cavitation damage and irrigation water and other problems. In this article, we introduce the maintenance of sewage pump.

Sewage pump with compact structure, suitable for conveying liquid containing hard solid, fiber and especially dirty, sticky, slippery liquid. ATO submersible sewage pump is mainly composed of impeller, pump body and base submersible motor. Pump and motor are the same shaft, because the pump is located at the bottom of the whole sewage pump, it can maximize the suction of accumulated sewage on the ground. In this article, we mainly introduce the use of sewage pump some considerations. Understanding these points, we can better use sewage water submersible pump.

Sewage pump is a pump and motor connected, and at the same time into the liquid pump products, compared with the general horizontal pump or vertical sewage pump, sewage pump compact structure, small footprint, easy installation and maintenance. In this article, we will introduce two kinds of technology of submersible sewage pump. The so-called auxiliary impeller hydrodynamic seal refers to the installation of an open impeller in the opposite direction near the back cover of the impeller of the sewage pump.

Submersible sewage pump is a solids handling pump with a large outlet and a powerful motor, designed to move liquid and sewage waste up to 2 inch in diameter. When we use sewage pump, there are also a lot of points to pay attention to, such as electric pump housing ground wire must be received in strict accordance with the relevant regulations; Do not wash items nearby when submersible pump is working; After the pump is connected, the direction of rotation from the inlet is counterclockwise. In this article, we will introduce some precautions when using sewage pump.