Blog

This article ATO summarizes how to apply and debug the VFD for the circular knitting machine in one textile mill. ATO chooses the non-inductive vector VFD. It adopts current vector control, its precise control as well as the characteristics of low-frequency stability and large torque, realizing the functions of big starting torque, stable operation, quick stop and so on of the circular knitting machine.

The working principle of the automatic industrial washing machine is: under the unified deployment and management of the time schedule controller. The VFD controls the induction motor to carry out positive and negative revolving uninterruptedly, thus achieving the non-synchronous movement of the water and the clothes, so as to enable the water and the clothes to rub and knead, thus being cleaned.

For a long period, the chemical, cement, ceramic industries and so on normally adopt the ball mill to grind the raw materials. Usually, the decompression start-up mode is employed. The high starting current has great shocks to the equipment and power grid. Meanwhile, in working frequency, it is easily to over grid the materials. The required grinding circle is long, with low grinding efficiency and high unit product consumption. This promotes people to study and develop the ball mill system with smooth start, high grinding efficiency, high output and low consumption. This is exactly the VFD control system.

The turning rolls are the devices, which drive the cylinder-shaped (or cone-shaped) weldment to rotate with the help of the friction force between the weldment and the driving rollers. The self-aligning turning rolls are suitable for welding the round cylinder. It can regulate by itself according to the size of the cylinder. There are several specifications for the customer to choose. The self-aligning turning rolls include two groups of main and vice devices for one set, which means to four wheels for each device: self-aligning active turning rolls and self-aligning passive turning rolls. The wheel is fabricated in the inner iron core and outer rubber structure. Therefore, it is durable in use, free of any vibration. The operation of the active turning rolls is synchronously driven by the speed regulating motor through two worm gear reduction box. Thus, turing rulls can realize stepless speed variating by using ATO VFD.

Using VFD for speed regulating has many advantages. Many small power motors adopt single phase power supply. How to use VFD to regulate speed for single phase motors? ATO will provide the following methods.

The wire drawing machine is one of the main equipment of the metal wire processing as well as the cable and wire industry. It is mainly used to process the metal wires into the fine lines of various specifications. It usually constitutes the paying off, water cooling, winding up, winding displacement and other components. Its electric drive part is mainly realized by paying-off motor, winding-up motor and winding displacement motor. The wire drawing machine belongs to the constant-torque load. Its characteristics require that the VFD has a big start-up torque and can satisfy the full-load output in low speed. Meanwhile, it requires realizing the coordinated control of several motors in high precision percentage.

At present, different processing means and processing technologies constantly emerge. Although the traditional technical approach is also refining, it still can't satisfy the present processing demand. Laser drilling is the earliest practical laser processing technology. It is also one of the main application fields of the laser processing. The materials with high rigidity and melting point can't realize some of their technological requirements through the traditional processing means. However, it is totally not difficult to achieve through laser drilling.

When the roots blower has went through improvement by VFD, the system can realize soft starting and soft stopping, so as to reduce the shock of the system to the power grid in start-up, thus reducing the system start-up times and ensuring a stable operation. What's more, because of the deceleration of the revolving speed in roots blower operation, it can reduce the mechanical wear and prolong the operating life of both the motor and the roots blower. If the system employs pressure closed-loop control improvement, the fully automatic control and unattended operation can be realized.

In recent years, as the increasing drastic market competition and the improving of the electromechanical integration technology in textile machinery, the textile machines at home and abroad generally enter into the era of frequency control and drive. The frequency control of the speed regulating replaces the traditional machine structure. It has been widely adopted to the shuttleless loom and basic textile equipment, such as blowing, cotton carding, lap forming, roving, spinning, spooling, warping, slashing, and the other main technological processes. What is more, the newly developed textile machines have adopted VFD to control motor speed without an exception, which has greatly improved the reliability of the textile machine, textile quality and automation degree.

Here ATO will take the application of high-performance vector VFD in a CNC machine factory as an example, to discuss about the frequency conversion control technique of CNC machine.

The advantages of VFD controls plastic extrusion machine

1. VFD controls the driving motor of the main engine and auxiliary engine, satisfy the required revolving speed and power of the process, make sure that the main engine and auxiliary engine can operate coordinately. ATO VFD realize the automatic control of the whole unit, ensure good quality and high yield.
2. Realize remote control, fine adjustment of the speed.

Except laser cutting, laser welding and laser marking technology, laser drilling is also one of the most important processing technologies in the mobile phone manufacturing. Because the laser can concentrate the energy in a very small area and it is controlled through the computer, it is very convenient to satisfy the processing requirement accurately.

It can be concluded that the nanosecond fiber laser has a bigger processing thermal influence to the soft materials like the battery electrode. Its laser beam is easy to cause big damage to the processing area and the surrounding area in processing. However, the picosecond fiber laser will bring fewer damages to the close areas in processing. It is feasible to employ the picosecond fiber laser to replace the traditional processing mean and the nanosecond laser in processing the electrode of the lithium-ion battery.

The automobile manufacturers adopt the advanced steel to weld the on-line laser welding system and employ the fiber laser cutting device to conduct deep processing of the auto sheet. The laser welding equipment of tailored blanks has the full-automatic feeding and blanking mechanical arm as well as the full-automatic workpiece matching organism. Coordinated with the fiber welding connection and welding seam tracking system, it is mainly used to process the metal material products and the sheet workblank of the inner and outer surface of the automobile.

The traditional cutting technology includes flame cutting, plasma cutting, water jet cutter cutting, linear cutting, punch processing and so on. As an emerging technology in the recent years, laser cutting irradiates the laser beam with very high energy density to the workpiece ready to be processed, so that the locality will be heated and melted. Then high-pressure gas is used to blow away the slag and form the cutting seam.

In industrial manufacturing, laser is one of the most preferred marking technologies. Metal, plastic, ceramic and other materials can all be marked by the laser in wave length 1064nm (infrared ray), 532nm (green ray) and 355nm (ultraviolet ray). As a high-tech tool, the laser can be appropriate to mark numbers, texts, bar code and matrix code. For example in the figure below, laser marking on plastic bottle, adapter, container seal and ear tags.

The active carbon filter can absorb the gas, peculiar smell and pollutant inhalable in the air, including the potential dangerous and carcinogenic chemical products and so on. The indoor air will be filtered and cycled through the active carbon filter and then be returned to the surrounding environment or discharged to the outside. This air filtering mean has been certified by the environmental protection agency (EPA). It has become the first choice because of the outstanding adsorptive property of the active carbon, thus being widely used. With the increasing demand to the quality of the indoor air, the manufacturer of the air filtering product can manufacture the standard and customized-designed active carbon filter through the fiber laser technology, so as to reach the requirements of OEM customers. Through using the fiber laser cutting system, the processing speed of most components of these OEM customers has promoted for 60%.

The glasses are widely used in the architecture, daily product, medical, chemical, home furnishing, electronic product, instrument, nuclear engineering and other fields. The glass is fragile. Therefore, it has a high technology to engrave on the surface of the glass products. The laser marking machine adopts non-contact processing, with short processing time and refined marking line. It can be used to make refined marking on the glass, such as any complicated character, image, pattern, trademark, LOGO, bar code, matrix code, batch number, signature and so on. All these can be completed with the laser marking machine. The following are the laser marking processes of glass products.

The laser marking technology is one of the biggest application fields in laser processing. The laser marking can print out various characters, symbols and patterns. The character size can be ranged from the millimeter to micron dimension. This is of special significance to the refined processing of the product. As a modern precise processing mean, the laser marking technology has significant advantages compared with the traditional means of corrosion, electrosparking, mechanical carving, and printing processing.

Compared with the traditional processing technology, the advantage of the fiber laser cutter in the food machinery manufacturing is extremely outstanding. The traditional processing mean requires die sinking, punching, shearing, bending and several other links. It has low working efficiency, big mold consumption and high operation cost. All these have hindered the steps of the food machinery industry to conduct innovative development.