Blog

Although three-phase isolation transformers and single-phase isolation transformers are different types of step-up & step-down isolation transformer products, they all have very similar functions and can be used for converting voltage and current, safe isolation and voltage regulation, and play a very important role in many professional fields. However, there are significant differences between them.

ATO provides customized 100W to 15kW high torque brushless DC motors with reasonable price. They come with different square flange size, rated speed from 1000rpm to 3000rpm, work at 12 volt, 24 volt, 48 volt, 96 volt voltage. Matched BLDC controller is available here which has powerful functions to meet your needs. The price of our high torque BLDC motors is listed as table below, check and buy one you desired right now, motor parameters are customizable according to your requirements.

LCR meter is also called LCR bridge or LCR tester. It is a precision digital instrument for measuring Inductance (L), Capacitance (C), and Resistance (R) and other secondary specifications of electronic components. The secondary parameters include |Z|, |A|, X, B, G, D, Q, θd, θr, RDC, Vm, Im, △%, etc. The selection basis of LCR meter mainly includes test frequency range, inductance range, capacitance range, resistance range, accuracy.

Data transfer unit is a wireless data acquisition device, abbreviated as DTU. It can continuously transmit analog/digital/switch values at high speed, adapt to Modbus protocol, support RS485 and RS232 ports. The built-in power amplifier and low-noise amplifier enable transmission power to reach the required value, at the same time improve receiving sensitivity to a certain extent, and improve the overall communication stability. Data transfer unit selection specifications mainly include transfer power, transfer distance, transfer characteristics, etc.

Power regulator is based on SCR (thyristor) and its trigger control circuit. It is a power controller unit for adjusting load power and controlling temperature. In addition, it is also used to limit electrical power and prevent circuits overload. ATO power regulators use linear phase shift control circuit, rated voltage is 380V, input is 3-phase 3-wire or 3-phase 4-wire, control signal is 4-20mA, 0-5VDC, 0-10VDC, built-in over-current protection function. Please select according to the required rated current or rated power.

Toroidal transformer is a kind of step-up and step-down power supply device, which has the advantages of small volume, low noise, less heat and high performance. Generally, we use a variety of voltages, such as 220V for domestic lighting, 36V for industrial safety lighting, and the voltage of the welding machine needs to be adjusted. These cannot be separated from the toroidal transformer, which can step down the voltage we need through the principle of electromagnetic mutual inductance of the main and auxiliary coils. But how to improve the conversion efficiency of toroidal transformers has been a problem for many people. In fact, the conversion rate of a toroidal transformer is determined by the transformer's power, production materials, and its work site.

A mini linear actuator refers to a transmission device with a small volume and a small stroke. When searching for electric actuators, customers will add a mini in front. When some customers inquire through email, the most important thing they concern about is the installation size and stroke length. Generally, the installation size is required to be small, and the stroke can be different according to different customization.

Control transformer is a small dry-type transformer, which is mainly used to change the voltage of AC power. It is wound by an iron core and a coil. It can change not only the voltage of the alternating current, but also the impedance. When the design power is not exceeded, the current can also be changed. In different environments, the transformer also has different applications. Generally, it is used as a control lighting and indicator light source for electrical appliances in machine tools and mechanical equipment.

Air pollution, mainly comes from haze, dust particles, smoke, automobile exhaust, second-hand smoke, soot and so on. Indoor air pollutants are mainly from decoration, because the widely-used decorative materials, plate, paint, glue, new furniture, adhesives, etc., easily produce harmful pollutants to human health. Indoor air quality monitor can detect the dust particles PM2.5 in the air, and also detect the formaldehyde and TVOC produced by decoration. Air pollution is very harmful to the human body, so a reliable air quality monitor can help you detect the air pollution index at home, and offer a comprehensive protection to pregnant women, children, the elderly and family members.

The difference between limit switch and proximity sensor:

1. Proximity sensors are non-contact switches with a long life and are suitable for passing objects. Limit switches are contact switches. Due to the internal contacts, the working life is relatively shorter.
2. Limit switches are used for position detection in one direction. For two-way position detection, using a proximity sensor is better.
3. Use limit switch for protection function. Use a proximity sensor to detect when an object passes a certain point.
4. The limit switch usually has 1 NO + 1 NC contacts. Generally only one group of contacts is used, so there are 2 wires. Proximity sensors generally adopt 2-wire, 3-wire and 4-wire, so they have more wires than limit switches. Some proximity sensors have to confirm it is PNP or NPN based on the connected equipment.

People found that the air conditioner also has a little dehumidification function in the process of using the air conditioner. Nowadays, air-conditioning manufacturers have deliberately added a dehumidification mode based on the two modes of cooling and heating to increase the selling point of air-conditioning. However, consumers still have many doubts about whether to buy air conditioners or dehumidifiers. So which one is more cost-effective to buy a dehumidifier or an air conditioner with dehumidification?

Indoor air pollutants mainly come from decoration, decorative materials, boards, paints, wall paints, glues, new furniture, adhesives and other pollutants widely used in decoration which will harm human health. The air quality monitor is used to detect formaldehyde (HCHO), PM2.5, TVOC and temperature and humidity in real time. It is small and exquisite, easy to carry. Through the inner sensors, the monitor can accurately measure the concentration of pollutants, and calculate the air quality index AQI, and give an alarm when the concentration exceeds the standard.

The rated voltage of the magnetic particle clutch brake is DC24V, and the normal torque is 1Nm ~ 400Nm. The main torques of ATO magnetic particle brake are 6Nm, 15Nm, 25Nm, 50Nm, 50Nm, 100Nm, 200Nm, 400Nm.It utilizes the characteristics of magnetic particle to transfer torque, provided that the current is supplied. After a number of authoritative technical tests and experiments, it has been found that the relationship between the exciting current and the transmitted torque is basically linear. Therefore, it seems to be very simple and convenient to adjust the torque of the magnetic particle clutch brake. As long as the magnitude of the exciting current is changed, the torque of the magnetic particle clutch brake can be easily adjusted. In addition, adjusting the torque of the magnetic particle clutch brake usually requires a tension controller (manual or fully automatic). The tension controller outputs a controllable DC0 ~ 24V or 0 ~ 4A for driving the magnetic particle clutch brake, thus realizing the constant tension control of the winding/unwinding process.

A voltage stabilizer is a kind of power supply device which can automatically adjust the output voltage. Its function is to stabilize the power supply voltage which fluctuates greatly and can not meet the requirements of electrical equipment within its set value range, so that all kinds of circuits or electrical equipment can work normally under the rated working voltage. Therefore, the key role of the stabilizer is to solve the voltage problem.

Limit switch is a device that makes use of the collision of the machine moving parts to make the contacts operating to realize the control circuit is turned on or off, so as to achieve a certain control purpose. It cooperates with other devices to form more complex automation equipments in industry. Therefore, selecting more suitable limit switches will make the entire automatic control system becomes more reasonable and efficient.

The basement is a common but special site. Nowadays, the utilization rate of the basement is increasing year by year. At the same time, it is a special site. Because it is lower than the ground, hidden in the ground, the room temperature is low, and the ventilation is not very good. Therefore, the humidity in the basement is generally higher than the ground, and some even have excessive humidity, which seriously affects various production and life activities in the basement. Therefore, we urgently need to deploy a dehumidifier in the basement for dehumidification. Today, we will briefly discuss how to appropriately use the dehumidifier in the basement. It is recommended that the corresponding model can be selected according to the different functions of the basement.

For the digital crane scale, in order not to affect its weighing result, it is required to calibrate it regularly. After investigation, many customers either neglect to calibrate the digital crane scale or have the incorrect calibration method. Now let's introduce you how to calibrate the digital crane scale correctly.

The plating rectifier adopts high frequency switching pulse technology and has the reasonable product structure and strong reliability. Because of its small size, light weight, high efficiency and high reliability, the power supply has become a new generation of silicon controlled rectifier and has been widely used in various plating solutions in the electroplating industry. Electroplating process includes four aspects: Electroplating solution, electroplating reaction, electrode and reaction principle, and electrodeposition process of metal.

For newcomers who are new to transformer knowledge, there are always some confusing knowledge points in a large number of basic concepts. Transformer on load operation and transformer no-load operation are included. This article will introduce load and no-load operation of a transformer, and explain the difference between the two.

Q: What are the features of a toroidal isolation transformer?
1. Toroidal isolation transformer is a transformer with input and output windings completely independent and isolated from each other with an insulation layer in the middle.
2. Toroidal isolation transformer is mainly used in places to avoid electric shock and protect human safety.
3. 220V to 220V toroidal isolation transformer is mainly used to isolate the earth.
4. Toroidal isolation transformers are used in most precision instruments, medical equipment, and mines.