Blog

The linear servo motor is a modular product integrating servo motor and screw, the electric linear servo motor converting the rotary motion of servo motor into linear motion, while converting the best advantages of servo motor - precise speed control, precise rpm control and precise torque control into precise speed control, precise position control and precise thrust control; a new revolutionary product that realizes high precision linear motion series.

Air pressure regulator adjusts the flow of the medium by controlling the opening degree of the opening and closing parts in the valve body, reduces the pressure of the medium, and adjusts the opening degree of the opening and closing parts with the help of the pressure behind the valve, so that the pressure behind the valve is kept within a certain range. Inside, and spray cooling water in the valve body or behind the valve to reduce the temperature of the medium, this kind of valve is called a pressure reducing and desuperheating valve. The characteristic of this valve is to keep the outlet pressure and temperature within a certain range when the inlet pressure is constantly changing. The pressure reducing valve is an essential accessory of the pneumatic control valve. Its main function is to reduce the pressure of the air source and stabilize it to a fixed value, so that the control valve can obtain a stable air source power for adjustment and control. This type of valve should generally be installed horizontally in the pipeline.

With the development of new materials, mechatronics, power electronics, computers and other related new technologies, synchronous motor control system has opened up a wide range of applications, to achieve high speed, high precision, high stability, fast response, high efficiency and energy saving motion control. In industrial and agricultural production, there are a large number of production machines that require continuous single-direction operation at roughly constant speed.

The butterfly valve has a simple structure, small size, light weight, and few components. It is very convenient to open, just turn the switch to 90 degrees. The butterfly valve controls the fluid very well, and can increase or decrease the flow rate at any time. Generally, the valve has a certain resistance when transporting any fluid, and the resistance of the butterfly valve mainly comes from itself, such as the thickness of the butterfly valve body. If you want to reduce the resistance to the fluid, just reduce its thickness.

A linear servo motor changes the rotational motion of a motor into a straight line. Conventional electric motors move in a circle, while linear actuators move forward and backward. The push and pull action allows the device to slide, tip, and lift items with the push of a button. The design provides operators accurate and precise control over the production. The fluid movement means the linear actuator requires minimal maintenance over its lifespan and comes with natural energy efficiency. They are easier to install than their hydraulic or pneumatic counterparts, cost less, and take up significantly less room.

Air motors work with power from compressed air, such as an air compressor. air motors weigh less than many electric motors, have a simple structure and can easily switch between forward and reverse rotation. air motors can have a smaller installation size than electric motors with the same power output, and can be used environmentally, quickly and safely. This article briefly introduces the application of air motor.

Synchronous motors, like induction motors (asynchronous motors) are a common type of AC motors. Synchronous motor is the heart of power system, it is a set of rotation and static, electromagnetic change and mechanical movement in one, to achieve electrical and mechanical energy conversion components. Synchronous motors can be divided into reluctance synchronous motor, hysteresis synchronous motor and permanent magnet synchronous motor. In this article, we will introduce these three types synchronous motor.

Isolators and Circuit Breakers both are electrical devices used to isolate a section of power system. But what are the differences between them? In this video we are gonna make clear the differences between Isolators and Circuit Breakers which are to be explained considering factors such as type of device and their action, operation of both appliances, their functions, withstand capability and applications, etc.

ATO anemometers are used in health supervision, environmental monitoring, health and epidemic prevention, university academies, food safety, industrial pollution, heavy metal dyes, potions, chemicals, beverages, bacteria, sewage, pulp, pharmaceuticals, fermentation, electroplating, drinking water production workshops, Planting, breeding and fishing sites. Here's how to use an wind anemometer and its precautions:

An anemometer is an instrument that measures the speed of air. There are many types of it, and the three-cup anemometer is widely used. Robinson in the United Kingdom invented the rotating cup anemometer, and it was four cups at that time, and then it was changed to three cups. The three parabolic or hemispherical empty cups fixed to each other on the rack are all in one direction, and the entire rack together with the wind cup is mounted on a freely rotatable shaft. The three-cup anemometer commonly used in meteorological stations is composed of three parabolic cone empty cups fixed on the bracket at 120° to each other, and the concave surfaces of the empty cups are all in one direction. The entire induction part is installed on a vertical rotating shaft. Under the action of wind, the wind cup rotates around the shaft at speed proportional to the wind speed. Another type of rotary anemometer is the propeller anemometer, which consists of a three-blade or four-blade propeller to form a sensing part, which is installed at the front end of a wind vane so that it is always aligned with the direction of the wind. The blades rotate about the horizontal axis at a speed proportional to the wind speed.

Both air circuit breaker (ACB) and molded case circuit breaker (MCCB) are used for the safe switching on and off of electrical systems. In principle, both serve the same purpose. The ACB is usually found on the upstream side of the circuit, while the MCCB is found on the load-side control (usually, the load-side switch operates more frequently than the upstream). These three protection devices are selected according to the required operating voltage and protection level (fault level) of the system. As technology continues to advance, the ratings and breaking capacities of MCCBs are increasing, so the applications of ACBs and MCCBs may overlap.

Autotransformers and isolation transformers are two different forms of transformers that work on the same principle. Both use an energy conversion between the alternating magnetic field and the alternating current in the coil to convert the voltage. So what's the difference between them? The following article lists six major differences between autotransformers and isolation transformers.

A linear servo motor is a modular product that integrates servo motor and lead screw, linear servo actuator is a direct drive solution where the load is directly connected to the moving portion of the motor. Direct drive linear motors are available in a variety of configurations (iron core, U-channel, tubular) but ultimately work the same.

The wind meter (anemometer) is an instrument that measures the speed of wind. To determine wind speed, wind meters detect changes in certain physical properties of the fluid or the effect of the fluid on a mechanical device inserted into the airflow. There are many types of it. The most commonly used in meteorological stations is the wind cup anemometer. Its sensing part consists of three parabolic cone empty cups fixed on the bracket at 120°to each other. The concave surfaces of the empty cups are all in one direction. The entire induction part is installed on a vertical rotating shaft. Under the action of wind, the wind cup rotates around the shaft at speed proportional to the wind speed.

Crane scale is a tool for measuring weight. The electronic crane scale is generally composed of a mechanical load-bearing mechanism, a load cell, an A/D conversion board, a power supply, a wireless transmitting and receiving device and a weighing display instrument. So how do we choose? Generally speaking, when choosing an electronic crane scale, you should pay attention to the following aspects: accuracy, measurement range, function, versatility, etc. Let's take a look at the details below.

The principle of the air motor is that a rotor with a number of vanes is enclosed in a rotor cylinder. Compressed air is supplied through one connection and air escapes from the other. For reliable starting, the springs press the vanes against the rotor cylinder and the air pressure always bears at right angles against a surface. This means that the resulting torque of the motor is due to the vane surfaces and the air pressure. In this article, we will talk about air motor working principle.

An induction motor refers to an AC motor that relies on electromagnetic induction between the stator and the rotor to induce a current in the rotor to realize electromechanical energy conversion. The stator of the induction motor consists of three parts: the stator core, the stator winding and the frame. Under normal circumstances, the rotor speed of the induction motor is always slightly lower or slightly higher than the speed of the rotating magnetic field, so it is also called an "asynchronous motor".

Traditional molded case circuit breakers use electromechanical (thermal-magnetic) trip units that can be fixed or interchangeable. MCCBs provide protection by combining temperature sensitive equipment with current sensitive electromagnetic equipment. Both devices act mechanically on the trip mechanism. In the use of molded case circuit breakers, various faults will be found, and frequent tripping of molded case circuit breakers is one of the common fault phenomena.

A hub motor is a electrical motor coupled to the wheels of a vehicle. It is commonly used in electric bicycle. The most commonly used hub motor is Brushless DC motor owing to its high torque to weight ratio. The hub motor is usually coupled to the wheels with speed controllers in order to vary the speed of movement of the bicycle.

When it comes to motors, the first thing that comes to mind is electric motors. But if you're looking for a motor with torque and energy efficiency, check out an air motor. Choosing the right motor type depends on your application and surrounding environment. Electric motors are useful for small items; air motors are great for factories, manufacturing facilities, etc. This article introduces something differernt between air motor and elecrical motor.