Blog

In fact, many UPS now also use lithium batteries, which can be integrated into standard racks. However, due to the limitation of volume, the battery capacity will not be very large. Correspondingly, the result is that the backup time is not long enough, and the rated backup time is maybe five minutes. Make sure that the server can be saved and shut down normally, or wait until the engine is powered on. But by 2022, in the current mainstream application solutions (95%+), UPS is still used in conjunction with lead-acid batteries. ATO uninterruptible power supply batteries are lead-acid batteries.

Today we are going to carry out vibration motor performance test. This is 220V input. (Force is 30kg) vibration motor. The rated current and power are 0.1A and 30W respectively. We are able to open one side of cover. Now we can see, adjustable eccentric block is connected end of rotor shaft. Both two sides of the nut are same construct. The eccentric block is used to obtain the exciting force. The combination of the specific designed motor and the eccentric block enable the motor to rotate.

ATO uninterruptible power supply is now widely used in mining, aerospace, industry, communications, national defense, hospitals, computer business terminals, network servers, network equipment, data storage equipment, emergency lighting systems, railways, shipping, transportation, power plants, substations, nuclear power plants, fire safety alarm system, wireless communication system, program-controlled switchboard, mobile communication, solar energy storage energy conversion equipment, control equipment and it's emergency protection system, personal computer, etc.

Linear servo motors, also called permanent magnet linear servo motors, generate thrust and speed based on supply current and voltage, and perform linear motion along the driven axis. A linear servo motor is an integral part of a closed-loop system, providing thrust and speed based on commands from the servo controller using a feedback device to achieve a closed-loop.

According to the situation of the equipment, the power consumption environment and the purpose of power protection, a suitable UPS can be selected. For low-power equipment with a built-in switching power supply, a backup UPS can generally be used. Online interactive or online UPS should be used in areas with harsh electrical environments. For equipment that does not allow intermittent time or requires sine wave AC power at all times, only online UPS can be used.

Indicator lights include a colored lens such as red, green, blue, yellowr, clear, or white. These colored lenses symbolize the condition of the machine or equipment to which the lights are connected. Brightness is measured in lumens, while the energy a bulb consumes is measured in watts. To produce similar amounts of light, LED and fluorescents bulbs consume far fewer watts than incandescent or halogen bulbs. In this atrticle, ATO.com will introduce dfferent colors of indicator light meaning.

Data acquisition is an interface that uses a device to collect data from outside the system and input it into the system. Data acquisition technology is widely used in various fields. For example, cameras and microphones are all data collection tools. The collected data are various physical quantities that have been converted into electrical signals, such as temperature, water level, wind speed, pressure, etc., which can be analog or digital. The data acquisition is generally a sampling method, that is, the data of the same point is repeatedly collected at a certain time interval (called a sampling period). 

The indicator light is a panel-mounted lamp assembly consisting of the indicator housing, an internal lamp, terminals, and a lens. The light source of indicator light is a high brightness pure color LED or incandescent bulb. As the name implies, indicator lights reveal the status (ON or OFF) of an electrical apparatus in switchboards. In more sophisticated systems, the indicating lights may annunciate the cause of the current interruption, such as line-to-ground fault, overload, and overcurrent condition.

A terminal block (also called as connection terminal or terminal connector) is a modular block with an insulated frame that secures two or more wires together. It consists of a clamping component and a conducting strip. Many people are relatively unfamiliar with the terminal, because although we can use and see it in normal times, we don't know what it is and what it does. 

Induction motor refers to a motor that relies on electromagnetic induction between the stator and the rotor to induce current in the rotor to realize electromechanical energy conversion. Three-phase asynchronous motors generally have two wiring structures, WYE (Y) and Delta (△). When the Y-type access voltage is 380V, we can change it to △ type 220V.

The ball valve is mainly used to cut off, distribute and change the flow direction of the medium in the pipeline. It only needs to be rotated 90 degrees and a small torque can be closed tightly. Ball valves are widely used in petroleum refining, long -distance pipelines, chemicals, papermaking, pharmaceuticals, water conservancy, electric power, municipal, steel and other industries. ATO offers one piece, two pieces, three pieces of stainless steel ball valves, sizes are available in 1", 1/4", 2' and 3"

Magnetic angle sensor is a high-performance integrated magnetic sensor. It is a new generation of angle sensor made by using the characteristics of magnetic signal induction and non-contact, and with the microprocessor for intelligent signal processing.
It has the characteristics of no contact and no friction, high reliability and long service life. Magnetic angle sensors are widely used in occasions with frequent mechanical changes, harsh environments, long service life and high reliability.

The three-piece ball valve is a relatively new type of ball valve. It has some unique advantages of its own structure, such as no friction on the switch, the seal is not easy to wear, and the opening and closing torque is small. This reduces the size of the mounted actuator. Equipped with a multi-turn electric actuator that adjusts the medium and closes tightly. ATO 3 piece ball valve sizes are available in 1", 1/2" and 3".

ATO UPS is the abbreviation of the uninterrupted English name, which appeared with the birth of the computer and is one of the commonly used peripheral devices of the computer. Actually. UPS is a kind of uninterruptible power supply with constant voltage and constant capacity with an energy storage device and inverter as the main component. Now that UPS is becoming more and more popular, let's take a look at the main protection functions of uninterruptible power supplies?

One piece ball valve is a relatively new type of ball valve. It has some advantages unique to its own structure, such as no friction on the switch, not easy to wear the seal, and small opening and closing torque. This reduces the size of the fitted actuator. Equipped with a multi-turn electric actuator, the medium can be adjusted and tightly shut off. It is widely used in petrochemical urban water supply and drainage and other working conditions that require strict cut-off.

A terminal is an interface used in electricity. It can be said that through the use of terminal blocks, we are able to make better use of our electrical. Although the terminal block seems to be very simple in this way, in fact, if we want to use the terminal block well, we need to understand the classification of the terminal block, so that we can use the terminal block better and correctly.

A PH meter is a commonly used instrument. With the development of science and technology, the application scope and technology of PH meter are constantly improving. There are a wide variety of PH meters, and various PH meter products are used to precisely measure the PH value of liquid media, such as industrial production and processing, food testing and other fields.

Centrifuge machines are widely used in various laboratories such as hospital laboratories, scientific research institutions laboratories, food and drug testing laboratories, and food hygiene laboratories. Centrifuge selection should pay attention to the following aspects.

Angle sensors, as the name suggests, are used to detect angles. It has a hole in its body that fits the shaft. When attached to the RCX, the angle sensor counts every 1/16th of a revolution of the shaft. When turning in one direction, the count increases, and when the turning direction changes, the count decreases. The count is related to the initial position of the angle sensor. When the angle sensor is initialized, its count value is set to 0.

LED indicator light control system, X-ray collimator is an important component of X-ray machine. Two sets of adjustable screen lead plates are used to define the X-ray exposure field in X-ray emission.Lies in its features, including PC and single chip microcomputer system, camera, motor drive circuit, two dc motors, camera installed in the led indicator light out of the mouth on the shell of light, and make your camera vision, camera to PC, PC output instruction transmitted by serial port to the single-chip microcomputer system, single chip microcomputer system after processing the data, the output through the motor drive circuit to control the led indicator light, and the longitudinal and transverse two dc motor are, inversion, two groups of driven by two dc motor regulation line lead plate movement.