Blog

Magnetic angle sensor is a high-performance integrated magnetic sensor. It is a new generation of angle sensor made by using the characteristics of magnetic signal induction and non-contact, and with the microprocessor for intelligent signal processing.
It has the characteristics of no contact and no friction, high reliability and long service life. Magnetic angle sensors are widely used in occasions with frequent mechanical changes, harsh environments, long service life and high reliability.

ATO UPS is the abbreviation of the uninterrupted English name, which appeared with the birth of the computer and is one of the commonly used peripheral devices of the computer. Actually. UPS is a kind of uninterruptible power supply with constant voltage and constant capacity with an energy storage device and inverter as the main component. Now that UPS is becoming more and more popular, let's take a look at the main protection functions of uninterruptible power supplies?

One piece ball valve is a relatively new type of ball valve. It has some advantages unique to its own structure, such as no friction on the switch, not easy to wear the seal, and small opening and closing torque. This reduces the size of the fitted actuator. Equipped with a multi-turn electric actuator, the medium can be adjusted and tightly shut off. It is widely used in petrochemical urban water supply and drainage and other working conditions that require strict cut-off.

The three-piece ball valve is a relatively new type of ball valve. It has some unique advantages of its own structure, such as no friction on the switch, the seal is not easy to wear, and the opening and closing torque is small. This reduces the size of the mounted actuator. Equipped with a multi-turn electric actuator that adjusts the medium and closes tightly. ATO 3 piece ball valve sizes are available in 1", 1/2" and 3".

A terminal is an interface used in electricity. It can be said that through the use of terminal blocks, we are able to make better use of our electrical. Although the terminal block seems to be very simple in this way, in fact, if we want to use the terminal block well, we need to understand the classification of the terminal block, so that we can use the terminal block better and correctly.

Angle sensors, as the name suggests, are used to detect angles. It has a hole in its body that fits the shaft. When attached to the RCX, the angle sensor counts every 1/16th of a revolution of the shaft. When turning in one direction, the count increases, and when the turning direction changes, the count decreases. The count is related to the initial position of the angle sensor. When the angle sensor is initialized, its count value is set to 0.

Looking for a reliable B2B pH meter? Read our industrial and lab pH meter buying guide to pick the right accuracy, electrodes, and PLC outputs without mistakes. If you need a pH meter for your farm, food workshop, lab, or factory, online specs can be confusing. Prices range from $20 to $2,000. Marketing words like "military grade" are everywhere. It's hard to know what to choose. This guide is written to save you money and headaches. 60% of this article focuses on practical budget toolkits for small business owners (hydroponics, food workshops, small wastewater). Note: If you need to publish SCI papers, pass FDA audits, or connect to a PLC system, please skip directly to Chapter 3 (Advanced Paths for Research & Engineers).

LED indicator light control system, X-ray collimator is an important component of X-ray machine. Two sets of adjustable screen lead plates are used to define the X-ray exposure field in X-ray emission.Lies in its features, including PC and single chip microcomputer system, camera, motor drive circuit, two dc motors, camera installed in the led indicator light out of the mouth on the shell of light, and make your camera vision, camera to PC, PC output instruction transmitted by serial port to the single-chip microcomputer system, single chip microcomputer system after processing the data, the output through the motor drive circuit to control the led indicator light, and the longitudinal and transverse two dc motor are, inversion, two groups of driven by two dc motor regulation line lead plate movement.

Centrifuge machines are widely used in various laboratories such as hospital laboratories, scientific research institutions laboratories, food and drug testing laboratories, and food hygiene laboratories. Centrifuge selection should pay attention to the following aspects.

A voltage stabilizer is a device that stabilizes the output voltage. It is composed of a voltage regulation circuit, a control circuit, and a servo motor. When the input voltage or load changes, the control circuit performs sampling, comparison and amplification. Then it drives the servo motor to rotate to change the position of the carbon brush of the voltage regulator. By automatically adjusting the coil turns ratio, the output voltage is kept stable. Today we will introduce the working principle of the voltage stabilizer, its function and its application. We hope that after reading this article, you will have a better understanding the functions of voltage regulators.

Can a UPS run a refrigerator? the answer is negative. UPS is strictly prohibited to connect the inductive load, it will overload. The refrigerator is designed with a wide voltage, no voltage regulator and other equipment are needed, a UPS of about 1000W is enough. The refrigerator works continuously for 5 hours, the battery capacity needs 12V&180Ah, plus the no-load power consumption, the conversion efficiency is estimated to be 80%, which can guarantee the refrigerator power supply for 8~10 hours.

UPS is an uninterruptible power supply with an energy storage device. It is mainly used to provide an uninterrupted power supply to some devices that require high power stability. What is the reason for the loud noise of the UPS? How to deal with it? Fans, inductors, and transformers will make noises when the UPS is working. When the UPS is working, generally a slow beep is a small fault (which can be automatically recovered), a rapid beep is a major fault (recoverable), and a long beep is a major fault. Let us learn together what are the reasons for the loud noise of UPS?

How much power does the UPS have? How to choose UPS power? The sum of squares of UPS active power and reactive power is equal to the square of apparent power. Generally, the active power is about 60%-70% of the apparent power. Confirm the power of the equipment loaded by our UPS, and then you can confirm the power of the UPS. In general, ATO.com recommends that the load power accounts for 30% to 80% of the UPS power.

When there is mains power, the UPS output is normal, but when there is no mains power, the buzzer beeps for a long time and there is no output. Fault analysis: It is judged from the phenomenon that the battery and inverter are partially faulty, and can be checked according to the following procedures.

Terminal block is an accessory product used to realize electrical connection, which is divided into the category of connector in industry. With the increasing degree of industrial automation and the stricter and more precise requirements of industrial control, the amount of terminal blocks is gradually increasing. The following small series will introduce to you how to connect the wiring terminals.

LED lighting (LED stands for "light emitting diode" ). And you know that it's the trend of the future. Even if it is not the current trend, it can illuminate everything, from our homes to public places to the indicator lights on our electronic devices. However, with the technology advancing more and more each year, Led lighting has allowed for more flexibility in design, greater efficiency in use and a host of other benefits that affect our daily living. This article is to tell you why choose high quality and suitable LED indicator light.

The uninterruptible power supply is a very important power supply device in our daily life and work, and it can even be said to be ubiquitous. So which type do we usually see? What are the differences between these different types of ups in their work? Let's take a look. Uninterruptible power supplies are usually divided into three types, namely offline, online, and online interactive. These three types of uninterruptible power supplies are very common in work and production.

Human machine interface refers to the field where people and machines contact or interact with each other in information exchange and function. This joint surface includes not only the direct contact between point, line and surface, but also the action space of long-distance information transmission and control. So how does HMI communicate with PLC?

Terminal block is a kind of accessory product used to realize electrical connection. The simple structure of the terminal block can play an extremely important connection role, the cost is low, and it is the best assistant for signal transmission.

UPS is a device that contains energy storage. It is a constant voltage and constant frequency uninterruptible power supply with an inverter as the main component, which can solve the problems of power failure, low voltage, high voltage, surge, noise and so on of the existing power, and make the computer system run more safely and reliably. Now ATO UPS has been widely used in computers, transportation, banking, securities, communication, medical, home, industrial control, etc.